MAXDRILL ROCK TOOLS CO.,LTD

DOME PLATE

Plate Code	Dimension mm	Thickness mm	Hole Dia. mm	Weight Kgs
MDDP12-4-33	125x125	4	36	0.42
MDDP12-4-39	125x125	4	42	0.40
MDDP125-4-47	125x125	4	49	0.38
MDDP150-4-33	150x150	4	36	0.72
MDDP150-4-39	150x150	4	42	0.70
MDDP150-4-47	150x150	4	49	0.68
MDDP150-6-33	150x150	6	36	1.08
MDDP150-6-39	150x150	6	42	1.05
MDDP150-6-47	150x150	6	49	1.02
MDDP200-4-39	200x200	4	42	1.25

• Domed plates are compatible with friction bolts, They are complementary products and assists in overcoming the problem of minor surface angularity

• Different shaped plates offered (OEM service offered)

• Corrosion protection may be provided by hot dip galvanizing

COMBI & DUO PLATE

Plate Code	Base Plate mm	Top Plate mm	Hole Dia. mm	Surface Finish
MDCDP-150-19P	280x400x1.9	150x150x4/125x125x4	36,42,49	Pre-Galv.
MDCDP-15O-19G	280x400x1.9	150x150x4/125x125x4	36,42,49	Hot Dip Galv.
MDCDP-150-19U	280x400x1.9	150x150x4/125x125x4	36,42,49	Untreated
MDCDP-150-16P	280x300x1.6	150x150x4/125x125x4	36,42,49	Pre-Galv.
MDCDP-150-16G	280x300x1.6	150x150x4/125x125x4	36,42,49	Hot Dip Galv.
MDCDP-150-16U	280x300x1.6	150x150x4/125x125x4	36,42,49	Untreated
MDCDP-150-15P	280x300x1.5	150x150x4/125x125x4	36,42,49	Pre-Galv.
MDCDP-150-15G	280x300x1.5	150x150x4/125x125x4	36,42,49	Hot Dip Galv.
MDCDP-150-15U	280x300x1.5	150x150x4/125x125x4	36,42,49	Untreated

• Incorporate a plate washer attached to a standard strata plate to give a superior product with enhanced performance.

• Designed with a profile that gives greater strength by strategically pressing the vees, placing the perimeter of plate in tension.

• Has “user-friendly" rounded comers

• Allows festering installation by eliminating the handling of two separate components

• Can facilitate flat and domed plates (up to 150mm square) to increase rock surface coverage area

• Can be utilized with lighter domed or flat plates to provide an economic advantage over heavier Is suitable for direct placement onto the rock surface or used against the welded mesh

• Are supplied with a slot for suspension of light services and some domed plates include a services support lug

STRATA PLATE

Plate Code	Dimension mm	Thickness mm	Hole Dia. mm	Weight (Blk/Galv.)Kgs
MDDP300-19U/G	300x280	1.9	50	1.35/1.40
MDDP40049U/G	400X280	1.9	50	1.80/1.85

• The strata plate is a light-weight plate with a large surface area.

• It is used as an intermediate plate to increase the surface coverage of a bolt.

• The plate feature both longitudinal and transverse V-shaped deformations for adding strength and greater ability to conform to irregularities in the rock surface.

• The deformed design renders a greater strength, placing the perimeter of the plate in tension.

• User friendly rounded corners.

• Can be used with both flat and domed plates (up to 150mm)

• The plate are can be placed directly to the rock surface or used with welded Steel Mesh.

• The plates are supplied with slots for supporting of light service lines.

• Corrosion protection may be provided by using pre-galvanized material.

MESH PALTE

Plate Code	Dimension	Thickness	Hole Dia.	Weight
	mm	mm	mm	(Blk/Galv.)Kgs
MDMP20O4U/G	200x200	4.0	36,42,49	1.30/1.40

♦ Used with installation of different stabilizers

♦ With bent up edges so that they do not cut the mesh

♦ Corrosion protection may be provided by hot dip galvanizing

BEARING PLATE

Plate Code	Dimension mm	Thickness mm	Hole Dia. mm	Weight Kgs
MDBP125-6	125x125	6	22	0.72
MDBP1506	150x150	6	22	1.02
MDBPlSOt	150x150	8	22	1.38
MDBP150-10	150x150	10	22	1.72
MDBP150-12	150x150	12	22	2.00
MDBP200-12	200x200	12	22	3.60
MDBP300-12	300x300	12	22	8.20
MDBP300-16	300x300	16	22	11.20
MDBP400-1B	400x400	18	22	22.50
MDBP400-20	400x400	20	22	25.00